Our platform has benefits for property managers and residents, select your role to learn more.

  • Property Manager
  • Resident
How it works team
  • Property Manager
  • Resident

For Property Managers, sfty is a comprehensive, connected solution that promotes peace of mind.

The platform consists of:
  • sfty Sense Multi Sensor (Smoke, Temperature and Motion Detector)
  • Water Leak Detector
  • Water Shut-Off Valve
The devices connect to:
  • sfty Control Management Dashboard
  • sfty Resident App
  • 24/7 Alarm Monitoring Station (CMS)*
  • WiFi mesh-based wireless network**
*Contract required
**Primary internet connection is provided by the building's or the resident's WiFi access point and internet connection. Separate internet-backhaul solution available subject to contract.
Features include:
  • Smoke Sensor: certified to BS EN 14604:2005/AC:2008
  • Temperature and Humidity Sensor: measures temperature and relative humidity
  • Motion sensor: Can be activated for motion alerts and alarms
  • Water Leak Detector: Can detect water leaks and potential freeze risks
  • Water Shut-Off Valve: To stop a water leak by turning off the mains water
Get started

Residents of multifamily buildings can gain peace of mind that comes from knowing your neighbors have the same level of smoke and water leak detection.

sfty integrates multi-sensor hardware devices including:
  • sfty Sense smoke detector
  • Water leak detector
  • Water shut-off valve
The devices connect to:
Features include:
  • Timely monitoring: Gain visibility into your smoke and water leak devices with alerts and status updates across all connected devices.
  • Device status messages: Low battery warnings and when devices alarm or offline are communicated via your app.
  • Centralised control: Building managers can view devices status remotely, which can reduce the need for physical visits to your home.
Get started

How it works

By delivering real-time insights, weekly status reports, and helping reduce the need for frequent on-site inspections, sfty enhances both time management and cost efficiency, making it a valuable tool for proactive property management. Learn more about the software and devices that make up the platform offer below.

  • MANAGEMENT DASHBOARD
  • SMOKE DETECTION
  • WATER LEAK DETECTION
  • WATER LEAK SHUT-OFF

sfty Control: Everything in one place

The sfty Control Management Portal serves as the central information hub for property managers, offering a streamlined, user-friendly interface for monitoring device status across common areas and individual apartments. sfty Control supports messaging to residents and issues a weekly report to property managers with a summary of events, device status and an archive of alarm reports.

Contact sales
Our history

Smoke detection

sfty Sense is an advanced optical smoke alarm that also measures temperature, humidity and motion, connecting to WiFi and contributing to communal smoke alarms for the building.

Contact sales
Our history

Water leak detection

The water leak sensor can detect water leaks and then alert the resident. The device can trigger an SMS notification to the resident, while also sounding an audible alarm. Neighbours below the flat, the board, and the caretaker can, depending on how the sfty platform is configured, receive notifications via the app or the sfty Control dashboard.

Contact sales
Our history

Water leak shut-off valve

In addition to sending notifications and alerts, our water leak solution can be integrated with a shut-off valve, allowing the water supply to be stopped at the source. This added feature can help reduce further water damage quickly and effectively, providing enhanced protection and peace of mind.

Contact sales
Our history

sfty Sense alarm escalation:

How it works - sfty Control and smoke
Global component - Resident
How it works - Evacuation
How it works - People on devices (16)
Discover

When smoke is detected, sfty Sense alarms can trigger an alarm throughout the affected home if the resident does not clear the alarm within 3 minutes. The resident can, depending on the configuration, receive incident notification via SMS.

How it works - sfty Control and smoke
Confirm

If no false alarm is registered by the resident or in the case of a smoke alarm being confirmed or if no response has been received from the resident, the alarm will signal to the nominated admins and also, subject to contract, contact the monitoring station/ emergency services with detailed information about the location and residents.

Global component - Resident
Notify

The connected sfty Sense devices in the building can trigger an alarm response and sound throughout the building to notify residents.

How it works - Evacuation
Communicate

Residents can, depending on how their app and the sfty Platform is configured, receive app and SMS notifications with information about where in the building a smoke alarm has been triggered and the evacuation route.

How it works - People on devices (16)

sfty Sense: Smoke, water leak, humidity, temperature monitoring.

Rectangle 122
Rectangle 123 (1)
Rectangle 124
Rectangle 125
Discover

When smoke is detected, alarms trigger throughout your home. You will also receive an incident notification via SMS and a remote alarm monitoring station will be automatically alerted to contact you and verify the alarm. All sfty devices in the building go into countdown mode, 3 minutes until alarm escalation.

Rectangle 122
Confirm

If no false alarm is registered by you or in the case of a confirmed fire or no response, the alarm will signal to the nominated building admins and relay the full alarm to the monitoring station/ emergency services with detailed information about the fire location, resident data, and fire status.

Rectangle 123 (1)
Notify

At this point, all of the sfty devices throughout the building common areas and individual properties will trigger an alarm response and sound throughout the building to notify all residents to evacuate.

Rectangle 124
Communicate

Your neighbours and other building residents will also receive app and SMS notifications with information about where in the building the alarm has been triggered, and where they should evacuate to.

Rectangle 125

From our first hello to final installation, we are with you every step of the way

Get started
Get in touch

Send us an e-mail or call us. We can arrange a date and time to discuss your project in more detail.

Site inspection

After a scoping call, we usually arrange a no obligation on-site inspection. We’ll review your existing systems, infrastructure and pain points, and get to know the building and your needs.

Proposal

After the site inspection we will prepare a detailed proposal and pricing. We can present this in person to a wider management team or your residents if required.

Installation

Our discrete, wireless devices are quick to install. Depending on the required number of devices, local facilities and local regulations, typical installations take no longer than 15-20 mins per apartment.

Requirements

The sfty platform is designed to primarily use the building's or residents' personal 2.4 GHz WiFi access points and internet connection to report device status and relevant alerts. Continuous access to such WiFi access points and internet connection must be given in order for the sfty platform to work as intended. The sfty Sense (smoke detection) devices (but not the water leak devices or water shut off valves) create a mesh network between them to add network resilience but several connections to the internet are required in order for the system to work as intended. A separate internet-backhaul connection can be provided but is invoiced separately. 

Receipt of alarms and alerts is dependent on third party network communications infrastructure and user preferences, amongst other things. Certain sfty features, such as sending SMS, are invoiced based on usage. 

Sfty collaborates with third party alarm monitoring stations to receive and action smoke alarms. These services are subject to a separate contract between the building manager and the alarm monitoring station.

Sfty collaborates with third parties where the installation of smoke detectors or electrical equipment is specifically regulated by local law. Sfty does not draw up or sign off on building fire safety plans or any changes to them.

No system guarantees the prevention or detection of all fires or water leaks or associated damage and losses. Building safety is complex, encompassing factors like compliance with building, water and fire regulations as well as proper configuration and maintenance of all alarm and detection devices. The sfty platform is only one such component and its effectiveness depends on its proper configuration, suitable placement of sfty-compatible devices, appropriate coverage of the building with sfty-compatible devices, regular maintenance (including batteries, mains connections and plumbing of the shut-off valve, if installed), reliability of internet connectivity and adherence to sfty's instructions and operating manuals. All connected features of the sfty Sense, water leak detection device and water shut off valves can terminate if your contract with sfty for the sfty platform terminates.

Other technical and compatibility requirements as well as sfty's standard terms and conditions apply.

Get started

Join Our Community of Residents

Become part of a connected living environment and gain peace of mind.